Open Formed Pinch Pots

 
I designed and made 3 of my own Pinch Pots, using a handful of white clay to roll into a ball. Using my thumb, I then pushed into the center of the clay and started pinching the sides, making the pot larger and thinner. Once I molded the clay into the shape I wanted it was then left in front of the heater to dry a little while I concentrated on my other 2 pots. Each pot was left until they were leather hard so I could then add more clay if I wanted, and shaping them more.

Using the coiling method i managed to add more clay, making the pot taller. This was done by rolling out a piece of clay that was able to wrap round the top, using slip and scoring the edges so it connects well. This was then gently smoothed into the rest of the pot without pressing too hard as it would change shape. Once they were finished I used the kidney tools to smooth out the surface of the pots. These were then ready to be put into the kiln.

Materials:

• White clay
• Heater
• Clay tools

Health & Safety:

• Clean surfaces after use
• Work in a well ventilated area
• Keep bags and coats away
• Wear an apron to protect clothing
• Clean the floor
• Wash the equipment after use
• Wash hands